Research association geothermal energy: KLEMM Bohrtechnik supplies drill rigs to heating specialist VAILLANT

Our new video shows the kinematics of the universal and anchor drilling rig KR 800-3G.

A KLEMM KR 801-3GK was recently used in Linden, Belgium to carry out the anchor drilling for the construction of a new residential and commercial building.

More than a hundred years ago, the seawall in Westerland on the island of Sylt was built to protect the town's exposed houses against tidal waves from the sea. With masonry breaking off in places and damage to some of the joints, the 500 meter long beach front wall is currently being reinforced section by section.

The Arun River in Nepal flows from Tibet through the Himalayas into China. Of all Nepalese river basins, it has the largest area covered in snow and ice. A new hydroelectric power plant is currently being constructed on this river, and it is expected to produce up to 900 MW of electricity. BAUER Engineering India Pvt. Ltd. was tasked by the Indian company Jaiprakash Associates Limited with the construction of a cut-off wall as part of the project Arun III HEP. The goal is to achieve a seal and reduce seepage water below the upstream cofferdam and in the left and right abutments.

The scope of service provided by Bauer includes the execution of 3,500 running meters of drilling and injection work on the cofferdam. In the granular construction soil, composed of sand, gravel, rubble and boulders, the pore injections are executed by means of tube-à-manchette and annular grouting.

This year three associations from our region are pleased to receive support for their projects involving young people.

Appropriately, on St. Nicholas' Day, the KLEMM management presented 1,000 euros each to the Drolshagen music band's support association, the children's and youth choir Schönau - Altenwenden and the AIDS charity located in Olpe. Additionally, a student at the University of Siegen will receive a scholarship of 1,800 euros for the duration of one year.

We wish all donation recipients and their organizations much success and great joy in their voluntary work and hope that they receive all the support they need for their projects.

This year, 25 KLEMM Bohrtechnik employees can look back on a total of 690 years of service to the company.

Once again we had the pleasure of welcoming an international group of visitors - this week our partner ECA with customers from the USA and Canada.

On the 10th of September at MATEXPO in Kortrijk, Tom Fransen, owner of OTTAER Funderingstechniek, along with his team, took delivery of their new KLEMM KR 806-3GS drilling rig.

We were delighted to welcome our US customers, together with BAUER Equipment of America, to their plant tour at KLEMM.

A highlight of their visit was getting the first glimpse of the brand new universal drilling rig KLEMM KR 800-3G.

Thank you for visiting us during these especially difficult times!

Even the most robust drilling rigs need maintenance and repairs. A spare part not on hand, no matter how small, can, in the worst case, cause the machine, or even the construction site to come to a standstill.

The solution: Our new KLEMM Service-Cases for the fast repair of KLEMM drilling rigs on the construction site, or in the workshop!

The application focus of our new KR 720 is on HPI, and other vertical, single pass drill holes up to 25 meters in depth.

After a long involuntary absence, finally a real-life trade fair with personal customer contact!

At SOLSCOPE, numerous visitors were able to experience live the latest KLEMM technologies in the geothermal and anchor drilling technology segments. The international trade exhibition for drilling, geotechnics and special foundation takes place every two years in France, this year it took place in Lyon.

Compact and lightweight, the newly developed KR 708-3GW complements the KLEMM product range for cased drilling with a double-head drilling system in the near-surface geothermal energy sector.

In recent weeks, we have further modernized and standardized our machinery with two new DOOSAN CNC turning centers.

In our video we show possible drilling positions which can be reached with our newly developed universal drilling rig KR 606-3 with electrically driven Power Pack PP 45E and radio remote control.

Compact dimensions, low weight and highly variable kinematics - our newly developed universal drilling rig KR 606-3 is predestined for extreme drilling positions in especially confined spaces. Due to the modular drilling rig concept, a wide spectrum of applications can be covered: underpinning, jet grouting, micro-piling, soil nailing and anchoring are all possible with what is currently the smallest and lightest KLEMM drilling rig available.

The KLEMM KR 805-3GW arrived at the premises of our partner AUVERGNE FORAGE in Lezoux, France, in perfect time for the drilling rig to be officially handed over as part of the Open Day. The very next day the drilling rig was already on the way to its first assignment - 150 km away in Bort-les-Orgues - where geothermal boreholes up to 200 m in depth are currently being drilled for the installation of a heating system.

No less than six KLEMM trainees have successfully passed their final exams.

Sincere thanks to you, our business partners and friends, for your trust and the good and successful cooperation! We wish you and your families a peaceful Christmas season and a happy and above all healthy 2021.

Many thanks to our employee Gerd Melcher for this winter wonderland!

Donations to regional institutions and organisations in the pre-Christmas season are a tradition at KLEMM Bohrtechnik. In addition to the company, the board of the Klemm charitable foundation had also decided to distribute a donation, so that a total of 11,800 euros was available this year.

With the purchase of its new anchor drilling rig, Tecimasa S.L.U., a Spanish Viuda de Sainz Group company and long-standing customer of KLEMM Bohrtechnik GmbH, relied once more, on state-of-the-art technology from KLEMM. In August a KR 806-4GM was commissioned in cooperation with KLEMM's partner KMMB Demolición y Perforación (Madrid), and the very first assignment took place at a construction site in the outskirts of the Basque industrial and port city of Bilbao.

Here you will find our offer for new KLEMM drilling rigs - ready for transportation within 4 weeks!

Only recently handed over to KLEMM's long-standing customer GbE Grundbau Essen GmbH, the newly developed KLEMM KR 704-3G was put to work in a residential area on the outskirts of Essen.

We introduce: the newly developed mini - drill rig KR 704-3G - the next generation within the proven and widely used KR 704 series.

Designed for demanding drilling tasks in urban environments and also within existing buildings, the new model scores with high performance, compact dimensions and low weight.

On the initiative of Roy Rathner, Managing Director Sales at KLEMM Bohrtechnik GmbH, KLEMM supports the efforts of a regional maker scene in the fight against the corona virus with donated material (PET-G, PVC films) and 3D printing capacities.

From now on you can also purchase our new drilling rig KR 806-3GS as a model at a scale 1:50!

Price / piece: € 199,-

The all-new KR 806-4GM universal anchor drilling rig was presented to an international trade show audience for the first time at CONEXPO/CON-AGG. The event is North America's largest construction expo and was held from March 10 to 13, 2020 in Las Vegas.

Belgium / Merksem – The Albert Canal, which connects the Meuse and the industrial areas of Liège with the Antwerp maritime port, stretches along for nearly 130 km, making it one of the main arteries for transporting goods by water in Belgium. In order to increase the capacity of the waterway to accommodate more and also larger ships, extensive expansion work has been taking place along the channel line.

That was it — the biggest bauma of all times — with over 620,000 visitors from over 200 countries, the trade show of superlatives! We would like to say thank you for all the exciting meetings and successful discussions with our numerous visitors.

Build your own KLEMM drill rig: just in time for the bauma, our new mini kit will be available at the BAUER Fanshop.

KLEMM Bohrtechnik GmbH has recently handed over a new KR 708-3F anchor drilling rig with a KH 25 rotary head to Bau-ABC Rostrup for training purposes.

Unusual surroundings for a drill rig — the Catholic Sint Hendrik Church near Brussels is currently being renovated. The church was built between 1908 and 1911 in the neo-Gothic style, as a replica of a Dominican monastery.

At the BAUMA 2019, KLEMM will be once again presenting several new developments. The focus of the exhibits is on innovations in the field of kinematics and device control as well as on the topics of energy efficiency and functional safety.

As in recent years Klemm Bohrtechnik once again supports an excellent student for one year within the scholarship program “Deutschlandstipendium”. The main object of this scholarship is to promote talents and to enable closer contacts to the local industry.

For the 10th time in a row we are able to support people and social projects in our region.

One highlight of this year's BAUER inhouse exhibition was the symbolic handover of the keys for the drilling rig KR 806-3G to our loyal customer Stump Spezialtiefbau / PORR Equipment Services Deutschland (PES).

This year the DRK (German Red Cross) children’s hospital in Siegen, the AIDS Foundation in the district of Olpe as well as a student of the University of Siegen are happy to benefit from the pre-Christmas donations of KLEMM Bohrtechnik.

Kortrijk, Belgium – numerous German companies presented once more their latest innovations for building equipment at the MATEXPO, one of the biggest trade fairs of its type in Europe. KLEMM Bohrtechnik showcased their anchor drilling rig type KR 801-3FK

Numerous guests and participants visited this year’s drilling technology congress and exhibition at Bau – ABC Rostrup, the training center of the construction sector of Lower Saxory and Bremen.

KLEMM recently showcased their latest drill rig technology at the CONEXPO trade show where every major construction industry was represented amongst more than 2500 exhibitors.

KLEMM Bohrtechnik supported once again the regional tournament of the First Lego League, which took place at the Konrad Adenauer school in Wenden. This year’s research topic “Animal Allies” referred to the relationship between humans and animals and future developments or improvements.

Again this year KLEMM Bohrtechnik takes social responsibility in their region instead of christmas donations to their business partners.

Leiden is not only the oldest university town in the Netherlands, but is also the birthplace of Rembrandt, the world-famous painter. Europe's deepest parking garage, with a total depth of 22 meters, is being constructed directly in the center of the picturesque old town.

KLEMM Bohrtechnik was awarded with the EuroTest Prize 2016 during the official reception of the BG BAU at the bauma exhibition in Munich. The award was given for the innovative implementation of the occupational health and safety concept for the newly developed KLEMM modular rod handling system (HBR series)

In the middle of December 2015 the symbolic hand-over of the keys for a new KLEMM drilling rig to Matthias Schäfer (Weimer GmbH) and Marcus Schwing (Kirchner Spezialtiefbau GmbH) and their team took place. It is the first KLEMM rig for th...

As part of a major project within the BAUER Group to the amount of 65 mio. Euro, KLEMM Bohrtechnik recently delivered three universal drilling rigs to build a cut-off wall for the diamond mine DIAVIK in Canada. Due to the geographical locat...

As in recent years, KLEMM Bohrtechnik once again supports the education of young people instead of giving Christmas presents to their business partners. This year the focus was set on the enthusiasm of students for the amazing field of tech...

As in recent years, KLEMM Bohrtechnik once again supports the education of young people instead of giving Christmas presents to their business partners. The “Deutschland Stipendium” which has already been sponsored by KLEMM several times ...

During the recent MATEXPO exhibition in Kortrijk (Belgium) the symbolic key of a new KLEMM drilling rig was handed over to Mr. Carl Can Rooy (owner of Van Rooy FBT bvba) and his team. With the KR 801-3FS the company took their second KLEMM ...

During the Bauer Open House 2015, a symbolic key was presented to KLEMM customer GUP from Isernhagen, for the purchase of their third KLEMM drill rig...

Keeping this slogan KLEMM employees took part with newly designed shirts in the coporate road races in Olpe, Siegen and Lüdenscheid taking place in June and July...

The most enjoyable time during an exhibition is the handing over of a new machine to a customer.Again, on this year’s BAUER Maschinen Open House, we had the pleasure of presenting to the management...

On the occasion of the recent BAUER in-house exhibition Harald Weber (KLEMM) and Bo Pilskär (GEOMEK, KLEMM representative for Scandinavia), celebrate the hand over of the KLEMM universal drill rig KR...

With a working weight of approximately 21 t the newly developed KR 806-5G enhances the line–up between the KR 806-3F (approx. 17 t) and the KR 807-7F (approx. 26 t). Driven by the implementation of...

As in recent years, instead of sending Christmas presents to their business partners KLEMM Bohrtechnik, once again, support child and youth community projects in the region.This years’ donations...

More than 450 guests came to attend the 50th anniversary celebration of KLEMM Bohrtechnik at the end of September.The gala event took place in one of the KLEMM assembly halls in festive atmosphere...

KLEMM Bohrtechnik will deliver the newly developed KR 806-3F as a multi purpose solution for tie back and micro pile work with vibro-drill system RHV 2400. The machine is also equipped for High...

During their exchange program a group of young students from Gif-sur-Yvette, the french twin town of Olpe, came to visit Klemm Bohrtechnik with their teachers. While touring through the production...

In the “Bauma - year” and with the 50th anniversary of KLEMM Bohrtechnik GmbH, what better way to celebrate the company’s existence than through the introduction of new and further...

With a Christmas donation in the amount of € 5.550,-- KLEMM Bohrtechnik and EURODRILL, once again, support local charitable organizations. In the Drolshagen region eight associations, exemplarily...

This year again donations were made to charitable organizations of the region. Klemm Bohrtechnik sponsors various projects of the Baby Welcome Organization, Vierjahreszeiten-GmbH and the...

Our customer GbE (Grundbau Essen GmbH) recently put another KLEMM rig type KR 704D into operation. The company is specialized in ground engineering and therefore demands a powerful and compact rig...

At the recent INTERMAT in Paris KLEMM Bohrtechnik presented their latest innovative technologies to the international trade.The universal rig type KR 909-1 for wire-line core drilling applications and...

In November 2011 KLEMM Bohrtechnik, once again, successfully attained the DIN EN ISO 9001:2008 certification from Lloyd’s Register Quality Assurance.The result of the audit by LRQA confirms the...

This new drill rig with an acutely compact design and its 1,8 m width is specifically intended for all special foundation applications where space constraints are an issue. The remote control allows...

During the BAUER in-house exhibition the symbolic key of the KLEMM drill rig KR 802-3S was handed over to the new owner VEIDEKKE Sverige AB. Many thanks to our Swedish customer for the good...

Mr. Richard Münch and Mr. Sebastian Münch, the owners of TERRA-TEC Grundbautechnik GmbH, purchased a new drill rig type KR 806-3F. The symbolic key was handed over on the occasion of the BAUER...

The newly developed drill rig type KR 909-1 was presented in "steel and iron" for the first time to a trade audience at the GEOFLUID exhibition in Piacenza on October 2010. The KR 909-1 is a compact...

With a Christmas donation in the amount of € 5.550,-- KLEMM Bohrtechnik and EURODRILL, once again, support local charitable organizations. In the Drolshagen region eight associations, exemplarily...

Our Swiss customer Erni Bohrtech AG celebrate hand-over of keys and commissioning of the new geothermal drill rig KR 805-2W. Erni Bohrtech belong to the Greuter group from Hochfelden,...

On a frosty day in January 2009 the drill rig type KR 2550 was handed over to the company STUMP Spezialtiefbau GmbH.The rig is equipped with the drill mast type 202 and the double head drilling unit...

The big day arrived just in time for Thanksgiving when our colleagues from BAUER Manufacturing Conroe (BMC) turned the ignition key. The first rig assembled in the USA, the bestseller KR 806-3D,...

For near surface geothermal drilling and the subsequent installation of the widely used double U heat pipe a combination of drill string with an inner rod diameter of 89 mm and 2 3/8” API thread and...

With the acquisition of the diesel hammer manufacturer PILECO in Houston in 2005 BAUER Maschinen GmbH now holds production and distribution facilities in the United States. With the purchase of a...

KLEMM Bohrtechnik recently obtained a gold medal for successful quality management. LRQA honoured KLEMM’s quality engagement of more than 10 years with the “Gold Award”. During the current audit the...

KLEMM Bohrtechnik GmbH was honored with the Euro Test Award on March 5th 2008 on the occasion of the construction machinery fair SAMOTER at Verona / Italy. The Euro Test Award appreciates outstanding...

We would like to inform you that with effect from the 21.09.2007 the business operations of KLEMM Bohrtechnik as a division of the BAUER Maschinen GmbH will be restructured out of the BAUER...

KLEMM Bohrtechnik presented itself very successfully on the BAUMA 2007. Never before have we been able to greet so many guests on our exhibition stand. The sales team of KLEMM Bohrtechnik would like...

Aimed especially at the requirements of the Geo-thermal industry we have developed the brand new KR 707-1W drill rig. It will be presented at the BAUMA exhibition 2007 for the first time to a...

Several KLEMM drill rigs were handed over on the occasion of the BAUMA exposition this year again. Here you will find more details. With his brand new KR 707-1W Mr. Bornitz of CMB...